What are the processing modes of the tufting machine-Jiangmen Xinhui District Meixin Brush Manufacturing Co., Ltd.

What are the processing modes of the tufting machine

　　1, automatic processing:

　　 This operation method is to connect the tufting machine to the processing product center. More than two talents fully automatic cycle processing. This processing method can release manpower more vigorously. The operation method is: in the standby state, press the number '1' to enter the automatic operation mode; when 'stopPay attention to production safety.

　　2, semi-automatic processing:

　　 Operation mode: press the 'start' button once, the tufting machine will process once, and the machine head will be at the highest position after processing the product The position is interrupted, and the operation reaches the starting point. Manually replace the product manually, and then press the 'Start' button again to process it again. Processing will not be performed without pressing the 'Start' button, so it can be protected and repaired in non-operational mode at any time.

　　The above are two more common tufting machine operation modes