Precautions when using the three-axis drilling and tufting machine-jiangmen xinhui district meixin comb manufacturing Co., ltd.

Precautions when using the three-axis drilling and tufting machine

　　Precautions when using the three-axis drilling and tufting machine:

　　 1) Every shift of the tufting machine should add drops of lubricating oil on the moving parts to Reduce mechanical wear.

　　2) Regularly check whether the screws are loose, and they should be tightened in time.

　　3) Keep the guide rails and screw rods clean to avoid debris sticking to the guide rails or screw rods and affect the accuracy of job positioning.

　　4) Ensure that the electric box is operated in a ventilated environment, avoid humid or high temperature environments, and avoid violent vibration of the electric box.

　　5) The electric box cannot be operated in a strong electromagnetic field environment, otherwise an uncontrolled situation may occur.

　　6) The input power wiring must be correct (red, blue, and yellow wires are connected to 380V three-phase wires respectively, the green wire is connected to the neutral wire, and the yellow-green phase wire is grounded), the pin number: 1, 2, 3 is 380V phase wire, 4 neutral wire, 5 ground wire. The operating voltage must be stable and maintained at AC380±10 V. Excessive voltage may cause electronic components to burn out.

　　7) Do not hit the touch screen with a hard object, otherwise it will cause a decrease in sensitivity and even break the glass screen.

　　8) Avoid pulling the cable too hard.

　　9) There is high voltage in the electric box. When something goes wrong, non-professionals should not disassemble it to prevent electric shock or even damage to system data.