Common faults and troubleshooting methods of tufting machine

1. The bristle brush and wool brush waste of the tufting machine are not clean. ① Increase the rotation speed of the roller, and slow down the transmission speed of the chain; ② Adjust the brush as close as possible to the direction of the roller, as long as the roller needle does not touch the filling strip in the brush head, it will not hurt the bristles. 2. The wires of the silk brush are bent and deformed. Firstly, reduce the speed of the rollers, and at the same time, increase the speed of the chain transmission. 3. The rubber chain on the bottom row is easy to drop rubber or the chain makes a strange sound, clean up the waste hair in the double-row sprocket groove in time, add lubricating oil (evenly, a little), and tighten the chain. 4. The brush head is easily sucked into the machine compartment. ①Adjust the pressing screw to compress the brush head tightly; ②Clean out the thickness of the brush head; There are gaps. 5. The regulating speed of the frequency converter is unstable. If the rotary adjustment switch is used, the adjustment switch may be damaged. Refer to the 'Instruction Manual-Function Parameter List' to modify the parameters, and change F0.00-0 to F0.00-1. In this way, use the up and down keys to set the speed. 6. The sound of the tufting machine is not normal when it is just started. ① If there is a lack of phase, check the circuit; ② Check the contactor, if the voltage is unstable, it is easy to damage the contactor; if dust enters the contactor, it is easy to cause poor contact, remove the dust or replace the contactor. 7. The tufting machine tripped. Check the circuit and check one by one. It is very likely that a motor is burned out and short-circuited. Pay attention to the lack of phase, which is easy to damage the motor. 8. The machine has induction electricity, so it must be connected to the ground wire. For more inquiries about tufting machines, high-speed toothbrush tufting machines, and toothbrush tufting machines, please pay attention to our website update