Application introduction of non-woven sanding brush wheel_FAQ

Nylon abrasive brush 　　 characteristics: 1. High melting point, high strength, good rigidity, etc.; 2. Abrasive nylon tensile strength ≥ 7.84N/cm2; 3. Brush roller brush filament density.　　Nylon brushing technical indicators: Φ0.5~0.7≥2500 pieces/cm2; Φ0.7~1.0≥2500 pieces/cm2 　　 radial non-gluing non-woven grinding brush wheel 　　 Application: light board surface brushing work, surface polishing treatment.　　 Advantages: Good grinding and polishing effect.　　 Disadvantages: abrasion is fast and cannot be used for deburring.　　Flake non-woven abrasive brush wheel　　Application: Cleaning and deburring, which is a more traditional production method.　　Advantages: the hardness of the shaft is consistent, and there is no vibration.　　 Disadvantages: it is easier to produce the situation where the sheet is separated from the sheet, more water is required to wash, and it is less easy to produce. Because it contains more materials, the price is higher.　　 non-woven brush roller 　 　 radial glue-filled non-woven brush brush wheel 　 　 application: general type of brush to remove slight burrs and clean and decorative surface. Advantages: 1. Longer life span (due to glue filling); 2. Good cleaning effect; 3. Soft materials are easy to remove burrs. 　　 Disadvantages: 1. The brush will become hard when it is close to the axis, and dynamic balance correction is required; 2. , In the case of oily substances or insufficient water, it is easier to cause blockage.　　Radial foaming integrally formed non-woven grinding brush wheel　　Application: Used for heavy deburring and heavy removal of residual glue.　　Advantages: It has good deburring and residual glue removal effects for all substances.　　 Disadvantages: The price is too high for standard items.　　Concentric circle non-woven abrasive brush wheel Brush wheel 　　Application: light cleaning, decorative surface and slight deburring.　　 Advantages: The amount of lint is less than other types.　　 Disadvantages: The direction of rotation must be kept constant. Due to the unstable rotation of the structure, it may cause surface streaks and vibration. Welcome to www.mxbrushmachinery.com