Professional Brush Making Machine Manufacturer since 1988.CHINA

The hair transplanting operation method and precautions of the hair transplanting machine

by:MX machinery      2021-05-06

In our daily life, tufting processing has gradually become very common, so what are the operating procedures of the tufting machine?

1. The voltage stabilizer outputs 200V AC to provide a 100kV transformer. One end of the transformer is grounded, and the other end is connected to the screen inside the wooden box.

2. Put the bucket filled with glue in the mixing bucket, and then tighten the lid of the bucket, then connect the air source and the spray gun, and then turn on the air source, first order the mixing bucket The electric fan inside stirs the glue evenly.

3. Put the plastic parts that need to be flocked into the glue mold, then put it into the air extraction box, open the spray box, spray a lot of glue on the plastic parts, and then Take the glue out of the glue mold and put it on the hanging stick.

4. Put the wooden stick into the flocking box, step on the switch, connect the power supply, and make the screen under the high voltage of static electricity to suck up the fluff. Then turn the part that needs to be flocked downwards, and keep swinging against the fluff, so that the fluff can reach an average for a period of time and adequately absorb the rubber parts.

5. Put the planted rubber pieces and wooden sticks into the furnace together, and dry the glue.

6. Take out the wooden sticks from the stove, then take out the plastic pieces from the sticks and put them away. After the plastic pieces have cooled to room temperature, begin to clean up the appearance of the flocking.

Precautions for hair transplanting:

1. Hair transplanting Each shift of the machine should add drops of lubricating oil on the moving parts to reduce mechanical wear.

2. Regularly check whether the screws are loose, and they should be tightened in time.

3. Keep the guide rail and screw rod clean to avoid debris sticking to the guide rail or screw rod and affect the accuracy of positioning.

4. Ensure that the electric box is in a ventilated environment, avoid humid or high temperature environments, and prevent the electric box from violent vibration.

5. The electric box can't be in the environment of strong electromagnetic field, otherwise, uncontrolled situation may occur.

6. The input power wiring must be correct (the red, blue, and yellow wires are connected to the 380V three-phase wire respectively, the green wire is connected to the neutral wire, and the yellow-green phase-to-phase wire is grounded), the pin number: 1, 2, 3 is 380V phase wire, 4 neutral wire, 5 ground wire. The voltage should be stable and kept at AC380+-10V. Excessive voltage may cause the electronic components to burn out.

7. It is forbidden to hit the touch screen with hard objects, otherwise the sensitivity will decrease, or even break the glass screen.

8. It is forbidden to pull the cable too strongly.

9, 9. There is high voltage in the electric box. When a fault occurs, non-professionals should not disassemble it to prevent electric shock or even damage to system data.

Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: