Regular inspection of hair transplanter equipment is a planned preventive inspection

The periodic inspection of hair transplanter equipment is a planned preventive inspection. In addition to the human senses, there must be certain inspection tools and instruments. It is executed according to the periodic inspection card. It is called periodic inspection. The mechanical equipment should also be checked for accuracy to determine the actual accuracy of the equipment. Foshan Taifenglai Tufting Machine Factory www.gd-tfl.com The equipment maintenance of the tufting machine should be carried out in accordance with the maintenance procedures. Equipment maintenance procedures are requirements and regulations for the daily maintenance of equipment. Adhering to the equipment maintenance procedures can extend the service life of equipment and ensure a safe and comfortable working environment. Its main content should include: (1) The equipment must be neat, clean, firm, lubricated, anti-corrosive, safe, etc. The content of the operation, the method of operation, the tools and materials used, the standards reached and the matters needing attention; (2) Daily inspection The parts, methods and standards of maintenance and regular inspection; (3) The content and methods of inspecting and assessing the degree of equipment maintenance by operators. There are four main requirements for the maintenance of the hair transplanter equipment: (1) Clean the inside and outside of the equipment, and there is no oil on the sliding surfaces, lead screws, racks, gear boxes, oil holes, etc., and no oil or air leakage at all parts. The chips, debris, and dirt around the equipment should be cleaned; (2) The tools, accessories, and workpieces (products) should be placed neatly, and the pipes and lines should be organized; (3) Good lubrication, add oil or change oil on time, and keep oiling , No dry friction, normal oil pressure, bright oil mark, unobstructed oil path, oil quality meets the requirements, oil gun, oil cup, and linoleum are clean; (4) Safely observe the safety operation regulations, do not overload the equipment, and the safety protection of the equipment The equipment is complete and reliable, and unsafe factors are eliminated in time.